Specifications
| Sensor Properties | |
|---|---|
| Sensor Model | Sony IMX532 CMOS (Pregius-S, BSI) | 
| Shutter Type | Global | 
| Sensor Size | 16.8mm (Type 1.1″) | 
| Resolution | 5320 x 3032 px, 16.2 MP | 
| Pixel Size | 2.74 µm (H) x 2.74 µm (V) | 
| Framerate | 75.6 FPS @ 16.2 MP (8 Bit ADC mode)1 76.1 FPS @ 16.2 MP (10 Bit ADC mode) 68.9 FPS @ 16.2 MP (12 Bit ADC mode) | 
| Physical Properties | |
|---|---|
| Dimensions | 55 x 55 x 95.5 mm | 
| Lens Mount | C-Mount | 
| Weight | 325 g | 
| Interface and Power Information | |
|---|---|
| Digital Interface | 10GBASE-T*, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX M12, PoE (*10GBASE-T runs in Short Reach Mode, 25m cable length max) | 
| Transport Layer Protocol | UDP (GigE Vision), TCP, RDMA (RoCE v2) | 
| GPIO Interface | 8 pin M8 connector | 
| Opto-Isolated I/O Ports | 1 input, 1 output | 
| Non-Isolated I/O Ports | 2 bi-directional | 
| Power Requirement | PoE+ (IEEE 802.3at) or 12-24 V through GPIO | 
| Power Consumption | <12W via PoE+, 11.5W when powered externally | 
*Max FPS based on 10% Device Link Throughput Reserve for packet resend. FPS stated in brackets () based on 0% Device Link Throughput Reserve. LUCID recommends 10% reserve for stream reliability. 1Running the sensor in 8-bit ADC mode results in a 4x noise penalty.
| Imaging Properties | |
|---|---|
| Image Buffer | 380 MB | 
| Image Processing | Gain, gamma, black level, white balance, LUT, CCM, pixel correction, hue, saturation, color space conversion | 
| Pixel Formats | Mono8/10/12/16, Bayer8/10/12/16, RGB8, BGR8, YCbCr8, YCbCr411, YUV422, YUV411 | 
| Image Modes | Horizontal and vertical binning, decimation, ROI, horizontal and vertical flip | 
| ADC | 8, 10, 12 bit | 
| Gain Range | 0 dB to 48 dB analog and digital Dual ADC Mode (low-gain, high-gain) | 
| Exposure Time | 6.976 μs to 10 s (Normal) 2.296 μs to 2.464 μs (Short Mode) | 
| Camera Features | |
|---|---|
| User Sets | 1 default and 2 custom user set | 
| File System Size | 16 MB | 
| Chunk Data | Image, CRC, histogram stats, timestamp, line status, sequencer set, pixel format, width/height, offset X/Y, pixel dynamic range min/max, gain, black level, exposure time | 
| Event Data | Exposure start/end | 
| Counter & Timer | 2 counters and 2 timers | 
| Sequencer | Exposure time, gain | 
| Synchronization | Software trigger, hardware trigger, PTP (IEEE 1588) | 
| Standards and Certifications | |
|---|---|
| Standard | GigE Vision v2.0 | 
| Compliance | CE, FCC, RoHS, REACH, WEEE | 
| Storage Temperature | -30 to 60°C | 
| Operating Temperature | -20 to 50°C ambient | 
| Humidity | Operating: 20% ~ 80%, relative, non-condensing | 
| Shock and Vibration | DIN EN 60068-2-27, DIN EN 60068-2-64 | 
| Industrial EMC Immunity | DIN EN 61000-6-1 ESD 4kV | 
| Warranty | 3 year | 










 
 
 
 
