| Sensor Properties |
| Sensor Model |
Sony IMX487 CMOS (Pregius-S, BSI) |
| Shutter Type |
Global |
| Sensor Size |
11.1mm (Type 2/3″) |
| Resolution |
2840 x 2840 px, 8.1 MP |
| Pixel Size |
2.74 µm (H) x 2.74 µm (V) |
| Framerate* |
135.6 (135.6) @ 8.1 MP (8 Bit ADC mode)
136.8 (136.8) @ 8.1 MP (10 Bit ADC mode)
126.1 (126.1) @ 8.1 MP (12 Bit ADC mode) |
| Physical Properties |
| Dimensions |
55 x 55 x 95.5 mm |
| Lens Mount |
C-Mount |
| Weight |
325 g |
| Interface and Power Information |
| Digital Interface |
10GBASE-T*, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX
M12, PoE (*10GBASE-T runs in Short Reach Mode, 25m cable length max)
|
| Transport Layer Protocol |
UDP (GigE Vision), TCP, RDMA (RoCE v2)
|
| GPIO Interface |
8 pin M8 connector |
| Opto-Isolated I/O Ports |
1 input, 1 output |
| Non-Isolated I/O Ports |
2 bi-directional |
| Power Requirement |
PoE+ (IEEE 802.3at) or 12-24 V through GPIO |
| Power Consumption |
<12W via PoE+, 11.5W when powered externally |
*Max FPS based on 10% Device Link Throughput Reserve for packet resend. FPS stated in brackets () based on 0% Device Link Throughput Reserve. LUCID recommends 10% reserve for stream reliability.
| Camera Features |
| User Sets |
1 default and 2 custom user set |
| File System Size |
16 MB |
| Chunk Data |
Frame counter, offset X/Y, width/height, exposure time, gain, black level, line status, sequencer set |
| Event Data |
Exposure start/end |
| Counter & Timer |
2 counters and 2 timers |
| Sequencer |
Exposure time, gain |
| Synchronization |
Software trigger, hardware trigger, PTP (IEEE 1588) |
| Standards and Certifications |
| Standard |
GigE Vision v2.0 |
| Compliance |
CE, FCC, RoHS, REACH, WEEE |
| Storage Temperature |
-30 to 60°C |
| Operating Temperature |
-20 to 50°C ambient |
| Humidity |
Operating: 20% ~ 80%, relative, non-condensing |
| Shock and Vibration |
DIN EN 60068-2-27, DIN EN 60068-2-64* |
| Warranty |
3 year |
*Listed specification testing in progress and is subject to change
Support Center
