Phoenix 1.6 MP Model

Sony IMX273 CMOS
1.6 MP, 1440 x 1080 px
Frame Rate
77 FPS

Please select your camera variables:

SKU: N/A Category:


Preliminary Specifications. For a complete list of specifications planned for launch please contact Lucid Sales.

Sensor Properties
Sensor Model Sony IMX273 CMOS
Shutter Type Global
Sensor Size 6.3 mm (Type 1/2.9″)
Resolution 1440 x 1080 px, 1.6 MP
Pixel Size 3.45 µm (H) x 3.45 µm (V)
Framerate 77 FPS @ 1.6 MP
Physical Properties
Dimensions 24 x 24 x 27.35 mm
Lens Mount C, CS, NF-mount
Weight 30 g
Interface and Power Information
Digital Interface 1000BASE-T RJ45, PoE
GPIO Interface 8 pin JST connector
Opto-Isolated I/O Ports 1 input, 1 output
Non-Isolated I/O Ports 2 bi-directional
Power Requirement PoE (IEEE 802.3af), or 12-24 VDC external
Power Consumption 3.1W via PoE, 2.5W when powered externally
Imaging Properties
Image Buffer 128 MB
Image Processing Gain, gamma, black level, white balance, LUT, CCM, pixel correction, hue, saturation, color space conversion
Pixel Formats Mono8/10/12/16, Bayer8/10/12/16, RGB8, YUV422, YUV411
Image Modes Horizontal and vertical binning, decimation, ROI, horizontal and vertical flip
ADC 12 bit
Gain Range 0 dB to 48 dB analog and digital
Exposure Time 30 μs to 10 s
Camera Features
User Sets 1 default and 2 custom user set
File System Size 16 MB
Chunk Data Timestamp, frame counter, offset X/Y, width/height, exposure time, gain, black level, line status, sequencer set
Event Data Acquisition start/end, exposure start/end, line rise/fall, error
Counter & Timer 2 counters and 2 timers
Sequencer Exposure time, gain
Synchronization Software trigger, hardware trigger, PTP (IEEE 1588)
Standards and Certifications
Standard GigE Vision v2.0
Compliance CE, FCC, RoHS, REACH, WEEE
Storage Temperature -30 to 60°C
Operating Temperature -10 to 55°C ambient
Humidity Operating: 20% ~ 80%, relative, non-condensing
Warranty 3 year


Interactive graphs – please hover over the points in the graph to reveal QE %

PHX016S-M (Mono, Sony IMX273 CMOS)
Mono EVMA 1288 Results
Dynamic Range 71.42 dB
SNR (Max) 40.21 dB
Saturation Capacity 10501 e-
Absolute Sensitivity Threshold (Measured at 527.5nm) 4.14 γ
Temporal Dark Noise 2.18 e-
Gain 0.370 DN / e-
PHX016S-C (Color, Sony IMX273 CMOS)
Color EVMA 1288 Results
Dynamic Range 71.34 dB
SNR (Max) 40.21 dB
Saturation Capacity 10487 e-
Absolute Sensitivity Threshold (Measured at 527.5nm) 4.62 γ
Temporal Dark Noise 2.21 e-
Gain 0.369 DN / e-


EMVA 1288 is the Standard for Measurement and Presentation of Specifications for Machine Vision Sensors and Cameras. For more information of the EMVA 1288 standard please visit


Phoenix CS-Mount Drawings

Phoenix CS-Mount Drawings

Phoenix NF-Mount Drawings

Phoenix NF-Mount Drawings

Quick Start Guide / More Info

Please note that cables, lenses, PoE power sources, interface cards, and tripod adapters are sold separately.

Step 1: Remove dust cap from camera lens mount

Remove Dust Cap
Press the dust cap button to release the cap from the camera.

Step 2: Attach Tripod Adapter

Attach Tripod Adapter
Use three M2 screws (2 in the front and 1 in the back) to attach the tripod adapter to the camera.

Step 3: Attach A Lens

Attach a Lens
Screw in an appropriate lens into the camera’s lens mount.

Step 4: Connect Cat 5e/6/6a to PoE device

Connect Cable to Network or Host PC
Connect a Cat 5e/6/6a cable to (a) PoE switch, (b) PoE injector or (c) PoE network interface card.
Note: You must use at least a Cat 5e cable to utilize GigE bandwidth.

Step 5: Connect Cat 5e/6/6a cable to camera

Connect Cable to Camera
Connect a Cat 5e/6/6a cable to the camera. The camera will briefly blink red upon power-up and then start blinking green once it is ready to stream.