LUCID 2-CH 10G/1G RDMA PoE+ Host Channel Adapter (HCA) Network Card

 

LUCID’s PCIE-10GPOE2-LUCID HCA network card is a dual-port 10GBASE-T, PoE+, PCIe 3.0 x8 Host Channel Adapter (HCA) that supports RDMA (RoCEv2), UDP, and TCP 10GigE data transfers with the Atlas10 – 10GigE camera. This network card is fully compliant with the IEEE 802.3an standard and uses the Broadcom BCM57416 Ethernet controller with the integrated dual-channel 10GBASE-T transceiver. This card supports PoE+ (IEEE 802.3at) with Molex 4-pin / SATA 15-pin connectors. Important: This RDMA HCA is not NBASE-T compatible and does NOT support 5GigE or 2.5GigE speeds.

Specifications

Manufacturer #:Ports:
LUCID PCIE-10GPOE2-LUCID2 x PoE+ 10GBASE-T IEEE 802.3an / 1000BASE-T IEEE 802.3ab
Other specifications and features:
• x8 PCI Express v3.0 compliant
• RDMA over Converged Ethernet (RoCEv2)
• SR-IOV with up to 128 VFs
• Function Level Reset (FLR) support
• TruFlow™ flow processing engine
• Virtual Network Termination–VXLAN, NVGRE, Geneve, GRE encap/decap
• vSwitch acceleration
• Tunnel-aware stateless offloads
• DCB support: PFC, ETS, QCN, DCBx
• SMBus 2.0
• MCTP over SMBus
• PCIe-based UART and KCS
• Jumbo frames up to 9 KB
• Advanced Congestion Avoidance
•Multiqueue, NetQueue, and VMQ
• IPv4 and IPv6 offloads
• TCP, UDP, and IP checksum offloads
• Large Send Offload (LSO)
• Large Receive Offload (LRO)
• TCP Segmentation Offload (TSO)
• Receive-side Scaling (RSS)
• Transmit-side Scaling (TSS)
• VLAN insertion/removal
• Interrupt coalescing
• Network boot-PXE, UEFI
• iSCSI boot
• MSI and MSI-X
• Conforms to the PCI Express Card Electromechanical Specification Rev. 3.0
Power Input for POE+ (IEEE 802.3at)
Step-Up 12V from the following source (A or B): A. From PCIe Slot (25 W or 75 W depends on mainboard design), B. From IDE Big 4 pin Power Connector or/and SATA 15pin Power Connector.
Package includes:
1 x 2 Port LUCID 10GigE RDMA PoE+ HCA, 1 x low profile bracket

USD $400.00

Register or login for pricing
SKU: PCIE-10GPOE2-LUCID Category: