Atlas10 65 MP Model (Gpixel GMAX3265)

Sensor
Gpixel GMAX3265 CMOS
Resolution
65 MP 9344 x 7000 px
Frame Rate
14.1 FPS
Model SKUsChromaLens Mount10GBASE-T GigE Vision Connector
ATX650G-MT2MonoTFL-II mountM12
ATX650G-CT2ColorTFL-II mountM12

Please select your camera configuration:

SKU: N/A Category:

Specifications

Important! Please note the following for the color and mono models:
• There is no IR filter installed on the ATX650G-CT2 (Color)
• There is no transparent glass installed on the ATX650G-MT2 (Mono)

Sensor Properties
Sensor ModelGpixel GMAX3265 CMOS
Shutter TypeGlobal Shutter
Sensor Size37.4 mm (Type 2.3″)
Resolution9344 x 7000 px, 65 MP
Pixel Size3.2 µm (H) x 3.2 µm (V)
Framerate14.1 FPS @ 65.0MP (12 Bit ADC Mode)
Physical Properties
Dimensions55 x 55 x 95.5 mm
Lens MountTFL-II Mount
Weight304 g
Interface and Power Information
Digital Interface10GBASE-T*, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX
M12, PoE (*10GBASE-T runs in Short Reach Mode, 25m cable length max)
Transport Layer ProtocolUDP (GigE Vision), TCP, RDMA (RoCE v2)
GPIO Interface8 pin M8 connector
Opto-Isolated I/O Ports1 input, 1 output
Non-Isolated I/O Ports2 bi-directional
Power RequirementPoE+ (IEEE 802.3at) or 12-24 V through GPIO
Power Consumption<12W via PoE+, 11.5W when powered externally
*Max FPS based on 10% Device Link Throughput Reserve for packet resend. FPS stated in brackets () based on 0% Device Link Throughput Reserve. LUCID recommends 10% reserve for stream reliability.

For color units, customers must supply their own IR filter. The preinstalled Color Correction Matrix on the ATX650G is calculated with the following IR filter: Midwest Optical SP645-72. This filter features a M72 thread size and will fit onto a TFL-II lens such as EO 35mm TFL-II 13-809

Imaging Properties
Image Buffer380 MB
Image ProcessingGain, gamma, black level, white balance, LUT, CCM, pixel correction, color space conversion
Pixel FormatsMono8/10/12/16, Bayer8/10/12/16, RGB8, BGR8, YCbCr8, YCbCr411, YUV422, YUV411
Image ModesROI
ADC12 bit
Gain Range0 to 13.66dB
Exposure Time24.832 µs to 10 sec
Camera Features
User Sets1 default and 2 custom user set
File System Size16 MB
Chunk DataImage, CRC, histogram stats, timestamp, line status, sequencer set, pixel format, width/height, offset X/Y, pixel dynamic range min/max, gain, black level, exposure time
Event DataExposure start/end
Counter & Timer2 counters and 2 timers
SequencerExposure time, gain
SynchronizationSoftware trigger, hardware trigger, PTP (IEEE 1588)
Standards and Certifications
StandardGigE Vision v2.0
ComplianceCE, FCC, RoHS, REACH, WEEE
Storage Temperature-30 to 60°C
Operating Temperature-20 to 50°C ambient
HumidityOperating: 20% ~ 80%, relative, non-condensing
Shock and VibrationDIN EN 60068-2-27, DIN EN 60068-2-64*
Warranty3 year
*Listed specification testing in progress and is subject to change

EMVA 1288 Data

ATX650S EMVA 1288 results. *These results were obtained without an IR cut filter. Please note this camera model does not ship with an IR cut filter.
Interactive graphs – please hover over the points in the graph to reveal QE %

ATX650G-MT2 (Mono, Gpixel GMAX3265 CMOS)
Mono EMVA 1288 Results
Dynamic Range64.49 dB
SNR (Max)40.0 dB
Saturation Capacity9957 e-
Absolute Sensitivity Threshold (Measured at 527.5nm)9.88 γ
Temporal Dark Noise5.38 e-
Gain0.36 DN / e-
Dark Current9.49 e- / s
Dark Signal Non-Uniformity3.03 e-
Photo Response Non-Uniformity1.35 %
Linearity Error Max/Min0.26/-0.34 %
ATX650G-CT2 (Color, Gpixel GMAX3265 CMOS)
Color EMVA 1288 Results
Dynamic Range65.2 dB
SNR (Max)40.47 dB
Saturation Capacity11148 e-
Absolute Sensitivity Threshold (Measured at 527.5nm)5.57 γ
Temporal Dark Noise5.6 e-
Gain0.35 DN / e-
Dark Current11.6 e- / s
Dark Signal Non-Uniformity3.12 e-
Photo Response Non-Uniformity1.72 %
Linearity Error Max/Min0.26/-0.34 %

emva-1288-logo

EMVA 1288 is the Standard for Measurement and Presentation of Specifications for Machine Vision Sensors and Cameras. For more information of the EMVA 1288 standard please visit http://www.emva.org/standards-technology/emva-1288/

Drawings

Atlas10 TFL-II Mount Drawings

ATX650G technical Drawings

Getting Started / Downloads

Getting Started Guide

For camera setup please visit our Getting Started Guide for LUCID cameras. This page covers how to:
  • Connect your camera for the first time
  • Download and install Arena SDK or 3rd party software
  • Enable Jumbo Frames on the Host PC and Camera
  • Assign camera IP address
  • Update camera firmware

Downloads

Visit our Downloads Page for access to:
  • Arena SDK (Arena View, APIs, Examples)
  • 3D CAD drawings (.step files)
  • Camera firmware files
  • Technical Documentation

Accessories

Tripod adapters, lenses, cables, and Power Over Ethernet (PoE) Ethernet injectors / interface cards are sold separately. Please note that Ethernet ports on most consumer motherboards and laptops do not support PoE. Visit our Accessories page for complete details on all accessories.
Lens Adapter ~ For Atlas10 TFL-II Mount Models:
(ATX65G)
Manufacturer Part #SKUSubject to 25% US import tariff?
(US customers only)
TFL-II Mount to F-Mount Lens (w/ Adjustable BFD) Adapter ADA-TFL2-F-ADJADA-TFL2-F-ADJNo
TFL-II Mount to Canon EF-Mount (w/ GPIO and Power) Birger AdapterADA-TFL2-EF-(US/EU)ADA-TFL2-EF-(US/EU)No
Lens Adapter ~ For Atlas10 TFL-Mount Models:
(ATX245S-CT/MT, ATX470S-CT/MT)
TFL-Mount to F-Mount Lens (w/ Adjustable BFD) AdapterADA-TFL-F-ADJADA-TFL-F-ADJNo
TFL-Mount Lens to F-Mount Adapter ADA-TFL-FADA-TFL-FNo
TFL-Mount Lens to C-Mount Adapter ADA-TFL-CADA-TFL-CNo
TFL-Mount to Canon EF-Mount (w/ GPIO and Power) Birger AdapterADA-TFL-EF-(US/EU)ADA-TFL-EF-(US/EU)No
Cables for Atlas10 Models
M12 to RJ45 IP67 Cat6a Cable (Amphenol) – 2.0m, Dark Green LUCID CAB-MR-2M-ACAB-MR-2M-ANo
M12 to RJ45 IP67 Cat6a Cable (Amphenol) – 5.0m, Dark Green LUCID CAB-MR-5M-ACAB-MR-5M-ANo
M12 to RJ45 IP67 Cat6a Cable (Amphenol) – 15.0m, Dark GreenLUCID CAB-MR-15M-ACAB-MR-15M-ANo
M12 to RJ45 IP67 Cat6a Cable (Amphenol) [Right Angle, Down] – 5m LUCID CAB-MR-5M-RA1-ACAB-MR-5M-RA1-ANo
M12 to RJ45 IP67 Cat6a Cable (Amphenol) [Right Angle, Down] – 15m LUCID CAB-MR-15M-RA1-ACAB-MR-15M-RA1-ANo
M12 to RJ45 IP67 Cat6a Cable (Amphenol) [Right Angle, Up] – 5m LUCID CAB-MR-5M-RA2-ACAB-MR-5M-RA2-ANo
M12 to RJ45 IP67 Cat6a Cable (Amphenol) [Right Angle, Up] – 15m LUCID CAB-MR-15M-RA2-ACAB-MR-15M-RA2-ANo
M12 to RJ45 IP67 Cat6a Cable (Amphenol) [Right Angle, Atlas Side] – 5m LUCID CAB-MR-5M-RA3-ACAB-MR-5M-RA3-ANo
M12 to RJ45 IP67 Cat6a Cable (Amphenol) [Right Angle, Atlas Side] – 15m LUCID CAB-MR-15M-RA3-ACAB-MR-15M-RA3-ANo
M8 GPIO 8-pin (Amphenol) 1.0m CableLUCID GPIO-M8-1M-AGPIO-M8-1M-ANo
M8 GPIO 8-pin (Amphenol) 5.0m CableLUCID GPIO-M8-5M-AGPIO-M8-5M-ANo
M8 GPIO 8-pin (Amphenol) 15.0m CableLUCID GPIO-M8-15M-AGPIO-M8-15M-ANo
M8 GPIO 8-pin Cable [Right Angle, Down(Triton) / Up(Atlas & Helios)] (Amphenol) -5.0m LUCID GPIO-M8-5M-RA1-AGPIO-M8-5M-RA1-ANo
M8 GPIO 8-pin Cable [Right Angle, Down(Triton) / Up(Atlas & Helios)] (Amphenol) -15.0m LUCID GPIO-M8-15M-RA1-AGPIO-M8-15M-RA1-ANo
M8 GPIO 8-pin Cable [Right Angle, Up(Triton) / Down(Atlas & Helios)] (Amphenol) -5.0m LUCID GPIO-M8-5M-RA2-AGPIO-M8-5M-RA2-ANo
M8 GPIO 8-pin Cable [Right Angle, Up(Triton) / Down(Atlas & Helios)] (Amphenol) -15.0m LUCID GPIO-M8-15M-RA2-AGPIO-M8-15M-RA2-ANo
Tripod Mount Adapter
Atlas10 Tripod AdapterATX-TRATX-TRNo
Interface Cards, PoE Injectors, Power Supply
LUCID 2-CH 10G/1G RDMA PoE+ Host Channel Adapter (HCA) Network Card
*This card supports RDMA on Atlas10
PCIE-10GPOE2-LUCIDPCIE-10GPOE2-LUCIDNo
Broadcom 2-CH 10G/1G RDMA Host Channel Adapter (HCA) Network Card
*This card supports RDMA on Atlas10
BCM957416A4160CPCIE-10GETH2-BCNo
Procet 2.5/5.0/10GbE 60W PoE++ InjectorProcet PT-PSE104GB-60-10POEP-PT(EU)Yes
M8 GPIO AC Adapter Power Supply (NA/EU/AU Versions)MEAN WELL GST60A18-P1JM8P-US1, M8P-EU1, M8P-AU1Yes