Support Center
Specifications
| Sensor Properties | |
|---|---|
| Sensor Model | Sony IMX537 CMOS (Pregius-S, BSI) |
| Shutter Type | Global |
| Sensor Size | 8.8mm (Type 1/1.8″) |
| Resolution | 2448 x 2048 px, 5.0 MP |
| Pixel Size | 2.74 µm (H) x 2.74 µm (V) |
| Framerate* | 207.2 FPS (207.2 FPS) @ 5.0 MP (8 Bit ADC mode) 208.6 FPS (208.6 FPS) @ 5.0 MP (10 Bit ADC mode) 171.3 FPS (171.3 FPS) @ 5.0 MP (12 Bit ADC mode) |
| Physical Properties | |
|---|---|
| Dimensions | 44 x 44 x 82 mm |
| Lens Mount | C-Mount |
| Weight | 243 g |
| Ingress Protection | IP67 (For IP67 protection Triton10 must be used with IP67 lens tube and cables) |
| Interface and Power Information | |
|---|---|
| Digital Interface | 10GBASE-T*, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX M12, PoE (*10GBASE-T runs in Short Reach Mode, 25m cable length max) |
| Transport Layer Protocol | UDP (GigE Vision), RDMA (RoCE v2, GigE Vision 3.0) |
| GPIO Interface | 17 pin M12 connector |
| Opto-Isolated I/O Ports | 1 input, 3 output |
| Non-Isolated I/O Ports | 2 bi-directional |
| Differential I/O ports | RS-422: 3 positive, 3 negative |
| Power Requirement | PoE (IEEE 802.3af) or 12-24 V through GPIO |
| Power Consumption | <8.3W via PoE, <7.5W when powered externally |
*Max FPS based on 10% Device Link Throughput Reserve for packet resend. FPS stated in brackets () based on 0% Device Link Throughput Reserve. LUCID recommends 10% reserve for stream reliability.
| Imaging Properties | |
|---|---|
| Image Buffer | 880 MB |
| Image Processing | Gain, gamma, black level, white balance, LUT, CCM, pixel correction, hue, saturation, color space conversion |
| Pixel Formats | Mono8/10/12/16, Bayer8/10/12/16, RGB8, BGR8, YCbCr8, YCbCr411, YUV422, YUV411 |
| Image Modes | Horizontal and vertical binning, decimation, ROI, horizontal and vertical flip |
| ADC | 8, 10, 12 bit |
| Gain Range | 0 dB to 48 dB analog and digital Dual ADC Mode (low-gain, high-gain) |
| Exposure Time | 5.288 μs to 10 s (Normal) / 2.312 μs to 2.472 μs (Short Mode) |
| Camera Features | |
|---|---|
| User Sets | 1 default and 2 custom user set |
| File System Size | 16 MB |
| Chunk Data | Image, CRC, histogram stats, timestamp, line status, sequencer set, pixel format, width/height, offset X/Y, pixel dynamic range min/max, gain, black level, exposure time |
| Event Data | Exposure start/end |
| Counter & Timer | 2 counters and 2 timers |
| Sequencer | Exposure time, gain |
| Synchronization | Software trigger, hardware trigger, PTP (IEEE 1588) |
| Standards and Certifications | |
|---|---|
| Standard | GigE Vision v2.0, GigE Vision v3.0 Ready* |
| Compliance | CE, FCC, RoHS, REACH, WEEE |
| Storage Temperature | -30 to 60°C |
| Operating Temperature | -20 to 55°C ambient |
| Humidity | Operating: 20% ~ 80%, relative, non-condensing |
| Shock and Vibration | DIN EN 60068-2-27, DIN EN 60068-2-64 |
| Industrial EMC Immunity | DIN EN 61000-6-2 |
| Warranty | 3 year |
*The GigE Vision v3.0 Standard has not yet been ratified. All Triton10 models will support the latest standard once it is released.
