Support Center
Specifications
| Sensor Properties | |
|---|---|
| Sensor Model | Sony IMX990 InGaAs CMOS |
| Shutter Type | Global |
| Sensor Size | 8.2 mm (Type 1/2″) |
| Resolution | 1280 x 1024 px, 1.3 MP |
| Pixel Size | 5.0 µm (H) x 5.0 µm (V) |
| Framerate* | 84.9 FPS (94.4 FPS) @ 1.3 MP (8 Bit ADC mode) 84.9 FPS (94.4 FPS) @ 1.3 MP (10 Bit ADC mode) 71 FPS (71 FPS) @ 1.3 MP (12 Bit ADC mode) |
| Sensitivity Range | 400 nm to 1700 nm (See EMVA 1288 Tab) |
| Physical Properties | |
|---|---|
| Dimensions | 60 x 60 x 65 mm |
| Lens Mount | C-Mount |
| Weight | 435 g |
| Ingress Protection | IP67 (For IP67 protection Atlas must be used with IP67 lens tube and cables) |
| Interface and Power Information | |
|---|---|
| Digital Interface | 1000BASE-T, 100BASE-TX M12, PoE+ |
| GPIO Interface | 8 pin M8 connector |
| Opto-Isolated I/O Ports | 1 input (2.5V-24V and 10.5V-24V), 1 output |
| Non-Isolated I/O Ports | 2 bi-directional |
| Power Requirement | PoE+ (IEEE 802.3at) or 12-24 V through GPIO |
| Power Consumption | <12W via PoE+, 11.5W when powered externally |
*Max FPS based on 10% Device Link Throughput Reserve for packet resend. FPS stated in brackets () based on 0% Device Link Throughput Reserve. LUCID recommends 10% reserve for stream reliability.
| Imaging Properties | |
|---|---|
| Image Buffer | 380 MB |
| Image Processing | Gain, gamma, black level, LUT, pixel correction |
| Pixel Formats | Mono8/10/12/16 |
| Image Modes | Decimation, Binning, ROI, horizontal and vertical flip |
| ADC | 8, 10, 12 bit |
| Gain Range | 0 dB to 42 dB analog and digital |
| Exposure Time | 20.5 μs to 10 s (Normal) / 2.88 μs to 7.42 μs (Short Mode) |
| Camera Features | |
|---|---|
| Cooling Capability | Thermoelectric cooling (TEC) for maintaining sensor temperature |
| User Sets | 1 default and 2 custom user set |
| File System Size | 16 MB |
| Chunk Data | Frame counter, offset X/Y, width/height, exposure time, gain, black level, line status, sequencer set |
| Event Data | Acquisition start/end, exposure start/end, line rise/fall, error |
| Counter & Timer | 2 counters and 2 timers |
| Sequencer | Exposure time, gain |
| Synchronization | Software trigger, hardware trigger, PTP (IEEE 1588) |
| Standards and Certifications | |
|---|---|
| Standard | GigE Vision v2.0 |
| Compliance | CE, FCC, RoHS, REACH, WEEE |
| Storage Temperature | -30 to 60°C |
| Operating Temperature | -20 to 50°C Case Temperature |
| Humidity | Operating: 20% ~ 80%, relative, non-condensing |
| Shock and Vibration* | DIN EN 60068-2-27, DIN EN 60068-2-64, DIN EN 60068-2-6 |
| Industrial EMC Immunity | DIN EN 61000-6-1 ESD 4kV |
| Warranty | 3 year |
