IMPORTANT! PCIE-POE2-MG (IOI DGEAP-PCIE4XG302) is going end of life. Purchase orders for PCIE-POE2-MG will be accepted until January 31, 2024.Please refer to PCN2023009.pdf for more information. For a potential replacement card please see the new P/N: PCIE-10GPOE2-LUCID (LUCID 2-CH 10G/1G RDMA PoE+ Network Card)
Manufacturer #
ioi DGEAP2X-PCIE8XG302
PCI Express
PCI Express Base Specification, r3.0 (compatible w/ PCIe r1.0a/1.1 & 2.0), PCI Power Management Spec r1.2, Microsoft Windows Logo Compliant, Supports Access Control Services, Dynamic link-width control, Dynamic SerDes Speed Control
MAC
Large Send Offload (LSO), Receive-Side Scaling (RSS), Direct Cache Access (DCA) header checksum
WoL power management, On-chip CPU DASH, MACsec, Quality of Service (QOS) support, Jumbo frames (up to 16Kbytes), IPv4, IPv6/TCP and IPv6/UDP checksum offload
Supports IEEE 802.3at Power Sourcing Equipment (PSE), Operates from a 54 V supply, Provides PD real-time protection through the following mechanisms: overload, under-load, over-voltage, over-temperature, and short-circuit, Auto mode – allows turning PDs on and off automatically.
Power Input for POE+
Step-Up 12V from the following source (A, B, C): A. From PCIe Slot (25 W or 75 W depends on mainboard design), B. From IDE Big 4 pin Power Connector or/and SATA 15pin Power Connector, C. From Mini-Fit Jr. Dual Row 6pin Power Connector
Number of Port
Two (2) 10GBASE-T RJ45 Ethernet port with Screw Holes for thumbscrew locking Type Ethernet Cable, One SFF-8654 4x 38pin connector ( PCIe x2, PCIe x2), One JST Compatible 2pin Wafer (Supply 3.3Vaux Power)