Spezifikationen
| Sensor | |
|---|---|
| Sensor | Sony IMX253 CMOS |
| Shutter-Technologie | Global |
| Sensorgröße | 17,6mm (Type 1,1″) |
| Auflösung | 4096 x 3000 px, 12,3 MP |
| Pixelgröße | 3,45 µm (H) x 3,45 µm (V) |
| Bildrate | 42,5 FPS @ 12,3 MP (8 Bit ADC-Modus) 34,5 FPS @ 12,3 MP (10 Bit ADC-Modus) 29,1 FPS @ 12,3 MP (12 Bit ADC-Modus) |
| Gehäuse | |
|---|---|
| Abmessungen | 55 x 55 x 70 mm (C-Mount) 55 x 55 x 65 mm (Kein Objektivanschluss) |
| Objektivanschluss | C-Mount / Kein Objektivanschluss |
| Gewicht | 240 g |
| Schnittstellen und Leistungsdaten | |
|---|---|
| Schnittstelle | 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX M12, PoE |
| GPIO Schnittstelle | M8, 8-pin-Steckverbinder |
| Opto-isolierte E/A-Anschlüsse | 1 input, 1 output |
| Non-isolierte E/A-Anschlüsse | 2 bidirektionale |
| Spannungsversorgung | PoE (IEEE 802.3af), oder 12-24 VDC extern |
| Leistungsaufnahme | 8W über PoE, 7W bei externer Stromversorgung |
| Kamerafeatures | |
|---|---|
| Bildspeicher | 380 MB |
| Bildoptimierung | Gain, gamma, black level, Weißabgleich, LUT, CCM, pixel correction, hue, saturation, color space conversion |
| Pixelformate | Mono8/10/12/16, Bayer8/10/12/16, RGB8, BGR8, YCbCr8, YCbCr411, YUV422, YUV411 |
| Bildkontrolle | Horizontal und vertikal binning, decimation, ROI, horizontal und vertikal flip |
| Bit-Tiefe | 8, 10, 12 bit |
| Gain | 0 dB bis 48 dB analog und digital |
| Belichtung | 25.4 μs bis 10 s (Normal) / 1 μs bis 16 μs (Kurzer Modus) |
| Speicherbare Benutzereinstellungen | 1 Default und 2 frei Speicherbare |
| Nichtflüchtiger Speicher | 16 MB |
| Chunk Daten | Frame counter, offset X/Y, width/height, exposure time, gain, black level, line status, sequencer set |
| Event Daten | Exposure start/end |
| Counter & Timer | 2 counters und 2 timers |
| Sequencer | Belichtungszeit, gain |
| Synchronisierung | Software trigger, hardware trigger, PTP (IEEE 1588) |
| Standards und Umgebungsbedingungen | |
|---|---|
| Standard | GigE Vision v2.0 |
| Konformität | CE, FCC, RoHS, REACH, WEEE |
| Lagertemperatur | -30 bis 60°C |
| Betriebstemperatur | -20 bis 55°C Umgebungstemperatur |
| Luftfeuchtigkeit | Operating: 20% ~ 80%, relativ, nicht kondensierend |
| Schock und Vibration | DIN EN 60068-2-27, DIN EN 60068-2-64 |
| Gewährleistung | 3 Jahre |











